Widths: 4.5 - 6 inches
Capacity: 1,150 pounds at 32 pounds per square inch
Diameter: 24.58 inches
Coker Vintage Bias
are DOT approved except 28X3 CL
warranty on these tires. Mileages will vary.
pressure can cause the sidewall to crack or
lead to tire failure.
static balance with weights on the inside of
the tire only in order to protect the soft
whitewall. This also gives a better visual
the use of lug centric balancing over hub
Due to the
cosmetic whitewall, these tires may take 3-5
ounces to balance. This is normal.
modern materials and techniques. All sizes
are made in the USA except for the
clinchers. The whitewall is molded into the
tire, NOT added on after the tire is made.
feature a life of the tread warranty.
whitewall with no lettering engraved.
techniques dictate the use of post inflation
during the manufacturing process; this may
lead to the tires being slightly larger than
an original. Some fitment issues can occur
with spare tire wells, side mounts or
Classics are not an OEM brand but perform on
par with the name brand tires.
measurements are non-scientific and may
change when using different rim widths.
bias and radials on the same vehicle because
the vehicle may steer uncontrollably.
Old rims can
be out of round and should be checked prior
*Please order your tires
carefully. Let us help you. If you need to return tires and it
is not our fault, there is a 20% re-stocking fee. Tires must be
returned in the same condition as shipped and not mounted. We
cannot accept tires once they have been mounted. Shipping costs are
the responsibility of the customer.
If you run
inner-tubes with your tires, it is imperative
that you carefully inspect and remove all
stickers on the inside of the tires. We have
found as many as six inspection stickers in one
are not always easy to remove. We have used a
hair dryer to loosen them up. If you do not
remove these stickers, they can puncture your
inner-tubes and cause a flat tire which could be
a safety-hazard. Please call us if you have any
questions on this important issue.
Coker Classic Nostalgia radial tires are designed
for pre-1976 vehicles and have modern aspect
ratios, so interchangeability is not implied nor
always possible because of rim widths, wheel
well clearance and speed and load ratings
It is very important to maintain proper
inflation pressure (35 psi MINIMUM) on Coker
Classic Nostalgia radial tires. 16" tires
require 41 psi.
Vehicles designed for bias ply tires may drive
considerably different with radial ply tires.
Please use extreme caution.
The information below applies to tires only, not other products such as our wheels.
Our Prices Include Shipping Charges except for Goodyear, Premium Sport and Vogue Tires.
No Hidden Fees or Trick Charges. Friendly advice is
a telephone call or email away.
*Please order your tires carefully.
Let us help you.
If you need to return tires and it is not our fault,
there is a 20% re-stocking fee.
Tires must be returned in the same
condition as shipped and not mounted.
We cannot accept tires that have been
mounted. Shipping costs are the responsibility of the customer.
Continental US Only. International Shipping is
available at reasonable rates
Serving the Collector Car Enthusiast to
Professional Restoration Shop since 1996