BF Goodrich 700 -16 - 4" Whitewall - Bias-Ply
* Note on photos shown: Tire and whitewall sizes are approximate and are offered as an example of how the tire generally appears.

BF Goodrich 700 -16 - 4" Whitewall - Bias-Ply

Your Price: $231.00
Free Shipping
Part Number:67660
  • Whitewall width: 4 Inches
  • Recommended Rim Widths: 4.5 - 5.5 inches
  • Construction: 6 PR Poly
  • Maximum Load Capacity: 1900 pounds at 32 Pounds Per Square Inch Air Pressure
  • Tread Width: 5.38 inches
  • Section Width: 7.40 inches
  • Overall Diameter: 30.60 inches
  • Handcrafted in the USA.
    ▪ Smooth whitewall.
    ▪ DOT and ECE certified
    ▪ UTQG: Unrated
    ▪ Approximate estimated mileage may vary
    ▪ Whitewalls are molded into the tire during construction, not added on later.

     
  • *Please order your tires carefully. Let us help you. If you need to return tires and it is not our fault, there is a 20% re-stocking fee.
  • Tires must be returned in the same condition as shipped and not mounted. We cannot accept tires that have been mounted.
  • Shipping costs are the responsibility of the customer.
  • If you run inner-tubes with your tires, it is imperative that you carefully inspect and remove all stickers on the inside of the tires. We have found as many as six inspection stickers. They are not always easy to remove. We have used a hair dryer to loosen them up. If you do not remove these stickers, they can puncture your inner-tubes and cause a flat tire which could be a safety-hazard. Please call us if you have any questions on this important issue.

 

  • BF Goodrich Tire Details
  • Construction: 4 Ply Poly unless otherwise noted above.
  • All 12, 13, 14 and 15 inch BF Goodrich tires are tubeless, except where noted above.
  • All sizes are both DOT and ECE marked. ECE is the certification for the European market.
  • UTQG: Not rated.
  • Recommended PSI: See above chart.
  • Mounting/Balancing Recommendations: Modern techniques dictate the use of post inflation during the manufacturing process; this may lead to the tires being slightly larger than an original. Some fitment issues can occur with spare tires wells, side-mounts or continental kits. Static balance with the weights on the inside of the tire only in order to protect the soft whitewall. This also gives a more pleasing appearance. Recommend the use of lug centric balancing over hub centric. Due to the cosmetic whitewall insert these tires may take 3 to 5 ounces to balance, this is normal.
  • Produced in the USA. The whitewalls, redlines and redlines are molded into the tire, not added on after the tires are made.
  • All listed measurements are non-scientific and may change with different rim widths.
  • Never mix bias and radials on the same vehicle because the vehicle may steer uncontrollably.
  • Old rims can often be out-of-round and should be carefully checked before mounting.

Recently Viewed Items